Voyager V6-3.0L VIN 3 (2000)
Clockspring Assembly / Spiral Cable: Adjustments
If the rotating tape (wire coil) in the clockspring is not positioned properly with the steering wheel and the front wheels, the clockspring may fail. The
following procedure MUST BE USED to center the clockspring if it is not known to be properly positioned, or if the front wheels were moved from the
straight ahead position.
Negative Battery Cable
WARNING: DISCONNECT AND ISOLATE THE BATTERY NEGATIVE CABLE BEFORE BEGINNING AIRBAG SYSTEM
COMPONENT SERVICE PROCEDURES. THIS WILL DISABLE THE AIRBAG SYSTEM. FAILURE TO DISCONNECT THE BATTERY
COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY. ALLOW SYSTEM CAPACITOR
TO DISCHARGE FOR TWO MINUTES BEFORE REMOVING AIRBAG COMPONENTS.
1. Adjust the steering wheel so that the tires are in a straight ahead position.
2. Remove Driver Airbag Module from steering wheel.
3. Disconnect wire connectors from back of airbag module.
4. Remove steering wheel.
