Voyager V6-3.0L VIN 3 (2000)
7. Raise the heat sleeve on the power steering return hose to expose the return hose to steel tube connection. Remove the return hose from the metal
tube of the power steering fluid return line. Then allow the remaining power steering fluid to drain from the system through the hose and metal
tube.
8. Remove nut attaching outer tie rod end to steering knuckle. Nut is to be removed from tie rod end using the following procedure, hold tie rod end
stud with a 11/32 socket while loosening and removing nut with wrench.
9. Remove both tie rod ends from steering knuckles, using Puller Special Tool MB-990635 or MB-991113.
