Voyager V6-3.0L VIN 3 (2000)
Suspension Spring ( Coil / Leaf ): Service and Repair
Leaf Spring
REMOVAL
1. Raise vehicle on frame contact hoist to a comfortable working position.
2. Support axle with a jack stand. Pad should just contact axle.
3. Begin removal of the shock absorber lower mounting bolt.
NOTE: If shock absorber bolt deflects upward during removal, raise axle by adjusting support jack. If shock absorber bolt deflects downward
during removal, lower axle by adjusting support jack (or by pulling on axle).
4. Using 2 jack stands positioned under the outer ends of the axle, raise the axle enough to remove the weight of the axle from the rear springs.
5. Loosen and remove the axle plate bolts from the rear axle.
