Voyager V6-3.0L VIN 3 (2000)
position, ending in the park or neutral position.
Fig. 11
(9) Check the transaxle fluid level and add an appropriate amount to bring the transaxle fluid level to 3 mm (1/8 inch) below the "ADD" mark on the
dipstick (Fig. 11).
(10) Recheck the fluid level after the transaxle has reached normal operating temperature (180 °F.). Refer to Fluid Level and Condition Check for the
proper fluid fill procedure.
(11) To prevent dirt from entering transaxle, make certain that dipstick is fully seated into the dipstick opening.
