Voyager V6-3.3L VIN 3 Flex Fuel (2003)
4.
Disconnect the wire connectors and remove the security alarm module (Fig. 1).
5.
Position the new security alarm module, p/n 05161581AA, install and tighten the fasteners.
6.
Connect the wiring connectors.
7.
Install the instrument panel top pad.
8.
Connect the battery negative cable.
NOTE:
All of the customer's RKE fobs must be programmed in the next step.
9.
Program the RKE fobs. Using the DRBIII(R) select:
a.
"DRBIII Standalone"
b.
"1998 - 2005 Diagnostics"
c.
"All (except below)"
d.
"Body Interior"
e.
"Body Computer"
f.
"Miscellaneous"
g.
"Program RKE"
h.
Follow the instructions on the DRBIII(R) screen.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE: