chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Heated Element, Mirror|Locations|Page 8774 > < Heated Element, Mirror|Locations|Page 8772
Page 1
background image

Heated Element: Testing and Inspection

Heated mirrors are available on models with Power Mirrors and Rear Window Defogger only The heated mirror is controlled by the rear window
defogger switch. The heated mirror is ON when the rear window defogger is ON.

1. The mirror glass should be warm to the touch.
2. If not, check the 20 amp fuse (11) in the Power Distribution Center (PDC) part of the Integrated Power Module (IPM) in the engine

compartment.

3. Test voltage at rear window defogger switch.

-

If no voltage repair wire.

-

Remove mirror glass and test the wires for continuity. If no continuity repair wires.

-

If wires are OK, replace mirror glass.

-

To test defogger switch refer to the appropriate section in Electrical.

Heated Element, Mirror|Locations|Page 8774 > < Heated Element, Mirror|Locations|Page 8772