Voyager V6-3.3L VIN 3 Flex Fuel (2003)
6.
Release the cable end and housing from the right side seat recliner assembly (Fig. 4).
7.
Remove the recliner cable.
8.
Install the new recliner cable, p/n 05066625AA.
9.
Attach the cable housing and cable end to the right side seat recliner assembly (Fig. 4).
10.
Attach the cable end and then the cable housing in the second slot position to the le side seat recliner assembly (Fig. 3).
11.
Attach the J-Retainers on the back side of the seat cushion.
12.
Attach the center seat belt buckle anchor. Tighten the anchor bolt to 39 Nm (29 ft. lbs.).
13.
Proceed to Step # 6 in the Cable Adjustment Procedure to check the recliner cable adjustment.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
