Voyager V6-3.3L VIN 3 Flex Fuel (2003)
8. Remove the horizontal bolts from the mount to the transaxle (Fig. 94) or (Fig. 95).
NOTE: To remove mount, additional lowering of transaxle may be required.
9. Remove left mount.
INSTALLATION
1. Install left mount on transaxle (Fig. 94) or (Fig. 95).
2. Raise transaxle with jack until left mount is in position.
3. Install left mount through bolt (Fig. 93).
4. Install left mount through bolt access cover.
5. Install front mount through bolt (Fig. 92).
6. Install left front wheel.
7. Lower vehicle.
