Voyager V6-3.3L VIN 3 Flex Fuel (2003)
Blower Motor Resistor: Testing and Inspection
Rear Blower Motor Resistor
Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of
wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds.
1. Disconnect and isolate the battery negative cable.
2. Disconnect the rear HVAC wire harness connector for the blower motor resistor from the resistor connector receptacle.
3. Check for continuity between each of the blower motor switch input terminals of the blower motor resistor and the resistor output terminal. In each
case there should be continuity If OK, repair the wire harness circuits between the blower motor switch and the blower motor resistor or the blower
motor pigtail wires as required. If not OK, replace the faulty blower motor resistor.
