Voyager V6-3.3L VIN 3 Flex Fuel (2003)
PARTS REQUIRED
INSTALL FINNED COOLER:
CAUTION:
Throughout the following procedure, special care should be taken to prevent introducing contamination into the power steering system.
1.
Open the hood.
2.
Remove the cap from the power steering fluid reservoir.
3.
Using a siphon pump/suction gun, remove as much power steering fluid as possible from the power steering fluid reservoir.
4.
Remove and save the constant tension spring clamp securing the power steering return line hose to the power steering fluid reservoir.
5.
Remove the rubber hose portion of the power steering return line from the power steering fluid reservoir fitting.
6.
Drain the power steering fluid reservoir into an appropriate container.
NOTE:
This fluid should not be reused to avoid introducing contamination from the container.
7.
Raise the vehicle on an appropriate hoist.
8.
Remove the fuel vapor canister.
