Voyager V6-3.3L VIN 3 Flex Fuel (2003)
Fuel Pressure Regulator: Service and Repair
REMOVAL
Fig. 9 Fuel Pressure Regulator O-rings
The fuel pressure regulator is part of the fuel pump module (Fig. 9). Remove the fuel pump module from the fuel tank to access the fuel pressure
regulator.
1. Spread tangs on pressure regulator retainer.
2. Pry fuel pressure regulator out of housing.
3. Ensure both upper and lower O-rings were removed with regulator.
INSTALLATION
1. Lightly lubricate the O-rings with clean engine oil and place them into opening in pump module (Fig. 9).
2. Push regulator into opening in pump module.
3. Fold tangs on regulator retainer over tabs on housing.
