Voyager V6-3.3L VIN 3 Flex Fuel (2003)
Horn Relay: Description and Operation
HORN SYSTEM
WARNING: ON VEHICLES EQUIPPED WITH AIRBAG, SEE PASSIVE RESTRAINT SYSTEMS FOR SAFETY PRECAUTIONS. See:
Restraint Systems DISCONNECT THE NEGATIVE CABLE FROM THE BATTERY BEFORE SERVICING COMPONENTS
INVOLVING THE AIRBAG SYSTEM. ACCIDENTAL DEPLOYMENT OF AIRBAG AND PERSONAL INJURY CAN RESULT.
DESCRIPTION
The horn circuit consists of a horn switch, clockspring, horn relay, horns and Body Control Module. The horn switch is a membrane switch located in
the airbag cover. The horns are located forward of the left front wheel behind the bumper fascia.
OPERATION
The horn relay plugs into the power distribution center which is located in the engine compartment.See: Relays and Modules - Power and Ground
Distribution/Relay Box For circuit information and component locations refer to Wiring Diagrams. See: Diagrams The horns will not function if the
switch is "CLOSED" for more than 30 seconds. Once the switch is "OPEN", A 20-30 second delay will occur before the horns are functional again.
