chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Engine Controls - No Start/MIL ON/DTC's P0508/P0509|Page 596 > < Engine Control - PCM Initialization Procedure|Page 591
Page 1
background image

Powertrain Control Module: All Technical Service Bulletins
Engine Controls - No Start/MIL ON/DTC's P0508/P0509

NUMBER: 18-005-04

GROUP: Vehicle Performance

DATE: February 3, 2004

THIS BULLETIN SUPERSEDES SERVICE BULLETIN 18-022-03 DATED MAY 23, 2003, WHICH SHOULD BE REMOVED FROM YOUR
FILES. THIS BULLETIN HAS BEEN EXPANDED TO COVER THE ENTIRE 2003 MODEL YEAR.

SUBJECT:
No-Start, Start & Stall, MIL Illumination, Diagnostic Trouble Codes (DTCS) P0508/P0509

OVERVIEW:
This bulletin involves replacing the Powertrain Control Module (PCM).

MODELS:

2003

(RG)

Chrysler Voyager

2003

(RS)

Town & Country/Caravan/Voyager

NOTE:

This bulletin applies to vehicles equipped with a 3.3L or 3.8L engine (sales codes EGA, EGH, EGM).

SYMPTOM/CONDITION:

Vehicle operator may describe a engine no-start, or start & stall, or MIL illumination with a rough/fluctuating idle. This condition may only occur in cold
ambient temperatures; below 0° C. (32° F). This condition may not be able to be duplicated after the PCM has warmed above 0° C. (32° F). This
condition can only be diagnosed in cold ambient temperatures; below 0° C. (32° F.).

Technicians may find the following DTCs:

P0508 - IAC Value Sense Circuit Low P0509 - IAC Value Sense Circuit High

DIAGNOSIS:

If the vehicle operator describes, or the technician experiences, any of the Symptom/Conditions, perform the Repair Procedure.

PARTS REQUIRED:

NOTE:

Order the part number PCM that is currently on the vehicle.

SPECIAL TOOLS/EQUIPMENT REQUIRED:

NOTE:

Engine Controls - No Start/MIL ON/DTC's P0508/P0509|Page 596 > < Engine Control - PCM Initialization Procedure|Page 591