Voyager V6-3.3L VIN 3 Flex Fuel (2003)
Clockspring Assembly / Spiral Cable: Adjustments
If the rotating tape (wire coil) in the clock spring is not positioned properly with the steering wheel and the front wheels, the clock spring may fail. The
following procedure MUST BE USED to center the clock spring if it is not known to be properly positioned, or if the front wheels were moved from the
straight ahead position.
1. Adjust the steering wheel so that the tires are in a straight ahead position.
2. Remove Driver Airbag from steering wheel.
3. Disconnect wire connectors from back of airbag.
4. Remove steering wheel.
5. Rotate the clock spring rotor clockwise until the rotor stops. Do not apply excessive force.
6. From the end of travel, rotate the rotor two turns counterclockwise until the wires end up at the top.
7. Install steering wheel and airbag.
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. REFER TO ELECTRICAL, RESTRAINTS, DIAGNOSIS AND
TESTING - AIRBAG SYSTEM FIRST.
