Voyager V6-3.3L VIN 3 Flex Fuel (2003)
Seat Belt Height Adjuster: Service and Repair
Shoulder Belt Height Adjuster
REMOVAL
1. Remove B or C-pillar trim cover
2. Remove screws attaching shoulder belt height adjuster to pillar.
Fig.13 Shoulder Belt Height Adjuster
3. Remove height adjuster from vehicle.
INSTALLATION
1. Place height adjuster into position.
2. Install screws attaching shoulder belt height adjuster to pillar. Tighten seat belt anchor bolts to 39 Nm (29 ft. lbs.) torque.
3. Install B or C-pillar trim cover.
