Voyager V6-3.3L VIN 3 Flex Fuel (2003)
Battery Tray: Service and Repair
Battery Tray
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the battery from the vehicle. Refer to the procedure in this section.
Fig.18 Battery Tray Position & Orientation
3. Remove the battery tray retaining fasteners (Fig. 18).
4. Pull battery tray up far enough to disconnect the engine vacuum harness hose from the battery tray mounted, vacuum reservoir.
5. Remove the battery tray from the vehicle.
INSTALLATION
1. Position the battery tray in the vehicle.
2. Connect the engine vacuum harness hose on the battery tray mounted vacuum reservoir.
3. Position drainage hose and install the battery tray retaining fasteners (Fig. 18).
4. Install the battery in the vehicle. Refer to the procedure in this section
5. Connect the negative battery cable.