Voyager V6-3.3L VIN 3 Flex Fuel (2003)
8. Place Remover/Installer, Special Tool 8459 on leaf spring and bushing as shown and tighten Set Screw securing Remover Plate to tool threaded
shaft.
9. Tighten nut, removing bushing from spring eye.
10. Remove the tool from spring, then remove bushing from tool.
INSTALLATION
1. Install by hand NEW bushing in left side of leaf spring eye.
2. Place Remover/Installer, Special Tool 8459 on leaf spring and bushing as shown and tighten Set Screw securing Installer Plate (8459-3) to tool
threaded shaft.