Voyager V6-3.3L VIN 3 Flex Fuel (2003)
5. Place crimping tool C-4975-A over bridge of clamp (Fig. 31).
6. Tighten nut on crimping tool C-4975-A until jaws on tool are closed completely together, face to face (Fig. 32).
CAUTION: Seal boot must not be dimpled, stretched, or out-of-shape in any way. If seal boot is NOT shaped correctly, equalize pressure in seal and
shape it by hand.
7. Position outer CV joint sealing boot into its retaining groove on outer CV joint housing.
8. Install sealing boot to outer CV joint retaining clamp evenly on sealing boot.