Voyager V6-3.3L VIN R (2000)
Airbag Upper Attachment
5. Install the bolts attaching forward airbag mount to the instrument panel.
6. Connect yellow wire connector from passenger airbag.
7. Install the glove box.
8. Install right front instrument panel speaker.
9. Install instrument panel top cover.
10. Do not connect battery negative cable. Refer to Diagnosis and Testing for Airbag System Test procedures.
UNDEPLOYED MODULE
REMOVAL
1. Remove instrument panel top cover.
2. Remove right front instrument panel speaker.
3. Remove glove box.
4. Disconnect yellow wire connector from passenger airbag.
5. Remove bolts attaching forward airbag mount to the instrument panel
6. Through access holes in instrument panel above glove box opening, remove screws holding airbag to back of panel.
7. Remove screws attaching airbag to upper instrument panel.
8. Remove airbag from instrument panel through top of instrument panel.
INSTALLATION
For installation, reverse the above procedures. Do not connect battery negative cable. Refer to Diagnosis and Testing for Airbag System Test
procedures.
