Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Control Assembly: Service and Repair
Control Assembly, HVAC
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the audio system.
3. Remove the lower left and the lower right HVAC controller retaining screws.
4. Remove the controller by pulling it out to provide clearance for the removal of the cable.
5. Disconnect the mechanical control cables by gently prying off the cable eyelet and unsnapping the cable housing from the mechanical slide.
IMPORTANT: Note the location of the cables and the housings to facilitate their reinstallation.
6. Disconnect the electrical connectors.
Installation Procedure
