daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Housing Assembly HVAC|Service and Repair|Page 3775 > < A/C High-Pressure Line|Page 3771
Page 1
background image

Housing Assembly HVAC: Service and Repair

Removal Procedure

1. Disconnect the negative battery cable.
2. Remove the instrument panel carrier assembly.
3. Drain the cooling system. 
4. Recover the refrigerant.
5. Compress the heater hose clamps at the fire wall and slide the clamps toward the engine.
6. Remove the two heater hoses from the core lines at the fire wall.
7. Turn the condensation drain hose and pull the hose off.

8. Remove the nuts that secure the A/C suction hose and liquid evaporator pipe connector block at the fire wall.
9. For vehicles equipped with ABS, remove the right front wheel. For non-ABS equipped vehicles, access is gained from above.

10. For vehicles equipped with ABS, remove the steering arm access plate.

Housing Assembly HVAC|Service and Repair|Page 3775 > < A/C High-Pressure Line|Page 3771