daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Blower Motor Relay|Service and Repair|Page 48 > < Electronic Brake Control Module|Diagrams|Page 43
Page 1
background image

Blower Motor Relay: Service and Repair

Blower Motor Relay

Removal Procedure

1. Disconnect the negative battery cable.
2. Remove the access panel at the instrument cluster end of the instrument panel.

3. Reach through this opening and push back a latch holding the control panel that contains the remote mirror control and the headlamp leveling

control.

4. Remove the panel from the dashboard.
5. Pull out the relay at front of the relay box.

Installation Procedure

Blower Motor Relay|Service and Repair|Page 48 > < Electronic Brake Control Module|Diagrams|Page 43