Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Rear Door Weatherstrip: Service and Repair
Door Weatherstrip
DOOR WEATHERSTRIP
REMOVAL PROCEDURE
1. Remove the door hold open link-to-body bolt.
2. Remove the door weatherstrip.
INSTALLATION PROCEDURE
1. Install the door weatherstrip.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the door hold open link to the body with the bolt.
Tighten
Tighten the door hold open link-to-body bolt to 35 N.m (26 lb-in).
