Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Brake Caliper: Service and Repair
Removal and Installation
Removal Procedure
1. Raise and suitably support the vehicle.
2. Mark the position of the front wheels relative to the wheel hubs and remove the wheels.
3. Remove the bolt and the washers that attach the brake hose to the caliper.
4. Disconnect the brake hose, and plug the openings in the caliper and the brake hose to prevent fluid loss and contamination.
5. Remove the caliper mounting bolts from the steering knuckle, and remove the caliper assembly.
Installation Procedure
1. Install the caliper assembly with the mounting bolts.
