Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Intake Manifold: Service and Repair
INTAKE MANIFOLD
Removal Procedure
1. Remove the fuel pump fuse.
2. Start the engine. Crank the engine for 10 seconds after it stalls to rid the fuel system of fuel pressure.
3. Disconnect the negative battery cable.
4. Disconnect the Powertrain Control Module/Engine Control Module (PCM/ECM) ground terminal from the intake manifold.
5. Drain the engine coolant.
6. Disconnect the intake air temperature (IAT) sensor connector.
7. Disconnect the air intake tube from the throttle body.
8. Disconnect the idle air control (IAC) valve connector.
9. Disconnect the throttle position sensor (TPS) connector.
