daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Heater Control Valve Cable|Service and Repair|Page 2833 > < Heater Control Valve Cable|Service and Repair
Page 2
background image

6. Remove the dash end trim panel.

7. Disconnect the vehicle recirculating/fresh air door cable through the dash end panel opening by gently removing the cable eyelet from the post and

snapping the housing clip from the retainer.

8. Repeat the procedure for the temperature control cable which is accessed from the lower passenger compartment.

INSTALLATION PROCEDURE

1. Connect the vehicle recirculating/fresh air door cable to the appropriate door by attaching the eyelet to the post and the cable housing to the slide.

Heater Control Valve Cable|Service and Repair|Page 2833 > < Heater Control Valve Cable|Service and Repair