Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Heater Core: Service and Repair
Heating and Ventilation System
REMOVAL PROCEDURE
1. Raise the hood.
2. Disconnect the negative battery cable.
3. Remove the instrument panel carrier assembly from the vehicle. Refer to Instrumentation/Driver Information.
4. Remove the heater/air distribution case from the vehicle. Refer to Manual Control Heating, Ventilation, and Air Conditioning System.
5. Remove the linkage screw from the lower heater core cover post.
6. Remove the linkage lever. Note the position of all the levers to facilitate reassembly.
NOTE: Handle the case carefully to avoid damaging the linkage levers.
7. Remove the screws that secure the heater core cover.
8. Slowly separate the lower heater core cover from the rest of the assembly. Retain the sealant.
9. Remove the screw and the bracket clamp that secure the heater core lines to the case.
10. Remove the spring clamp that secures the heater core body to the case.
11. Remove the heater core from the case.
INSTALLATION PROCEDURE
