Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Engine Control Module: Service and Repair
Powertrain Control Module/Engine Control Module
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the passenger seat. Refer to Seats.
3. Disconnect the powertrain control module (PCM)/engine control module (ECM) connectors.
4. Remove the PCM/ECM from the PCM/ECM mount.
Installation Procedure
1. Position the PCM/ECM in place.
2. Install the PCM/ECM to the PCM/ECM mount.
3. Connect the PCM/ECM connectors.
4. Install the passenger seat. Refer to Seats.
5. Connect the negative battery cable.
6. Perform a crankshaft position system variation learning procedure. Refer to "DTC P1336".