Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Blower Motor Relay: Service and Repair
Heating and Ventilation System
HIGH-BLOWER RELAY
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the access panel at the instrument cluster end of the instrument panel.
3. Reach through this opening and push back a latch holding the control panel that contains the remote mirror control and the headlamp leveling
control.
4. Remove the panel from the dashboard.
5. Pull out the relay at front of the relay box.
INSTALLATION PROCEDURE