Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Power Steering Line/Hose: Service and Repair
Hoses and Pipes
STEERING GEAR CYLINDER PIPES
Removal Procedure
1. Siphon the power steering fluid from the fluid reservoir.
2. Disconnect and remove the steering gear cylinder pipes at the rack and pinion housing. Remove the O-ring seals from the housing.
Installation Procedure
1. Install new O-rings onto the cylinder pipes. Install the steering gear cylinder pipes into the rack and pinion housing.
Tighten the power steering line fittings at the cylinder end to 28 Nm (21 ft. lbs.).
Tighten the power steering line fittings at the valve end to 18 Nm (13 ft. lbs.).
2. Fill the fluid reservoir with power steering fluid.
3. Inspect for leaks. If there are leaks, correct the cause of the leaks and bleed the system.
