Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Suspension Strut / Shock Absorber: Service and Repair
Front Strut
FRONT SPRING/STRUT CARTRIDGE
-
Tools Required
-
J-42468 Front Strut Mount Nut Wrench
-
KM-329-A Spring Compressor
-
KM-331 Strut Cartridge Closure Nut Wrench
-
KM-465-A Front Spring Compressor
Disassembly Procedure
1. Mount the front spring compressor KM-465-A and the spring compressor KM-329-A on a mounting trestle, a workbench, or any other suitable
surface.
2. Raise and suitably support the vehicle.
3. Remove the wheel.
4. Remove the strut assembly.
5. Fasten the strut assembly to the spring compressor. Make sure the hooks are seated on the strut spring properly.
6. Compress the front spring with the front spring compressor KM-465-A and the spring compressor KM-329-A.