Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
3. Install a new large seal-retaining clamp and a new small seal-retaining clamp.
4. Crimp the new small seal-retaining clamp and the new large seal-retaining clamp using the seal clamp pliers J-35566.
5. Install the cross groove joint seal assembly.
CROSS GROOVE JOINT SEAL
-
Tools Required
-
J-35566 Seal Clamp Pliers
-
J-8059 Snap Ring Pliers
Removal Procedure
1. Remove the large seal-retaining clamp. Discard the clamp.
2. Remove the small seal-retaining clamp. Discard the clamp.
3. Degrease the joint.