Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
3. Position the glass within the window regulator.
4. Install the glass screws.
Tighten
Tighten the door glass screws to 7 N.m (62 lb-in).
5. Install the door seal trim. Refer to Doors.
6. Install the exterior rear door garnish molding with the screws.
Tighten
Tighten the exterior rear door garnish molding screws to 1.5 N.m (13 lb-in).
7. Install the interior rear door garnish molding.
8. Install the outside channel molding. Refer to Doors.
9. Install the rear door trim panel. Refer to Interior Trim.
