Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
11. While holding the intake camshaft firmly in place, remove the intake camshaft gear bolt.
12. Remove the intake camshaft gear.
13. While holding the exhaust camshaft firmly in place, remove the exhaust camshaft gear bolt.
14. Remove the exhaust camshaft gear.
Installation Procedure
Notice: Take extreme care to prevent any scratches, nicks or damage to the camshafts.
1. Install the intake camshaft gear.
2. While holding the intake camshaft firmly in place, install the intake camshaft gear bolt.
Tighten the intake camshaft gear bolt to 67.5 Nm (49 ft. lbs.).
3. Install the exhaust camshaft gear.