Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
24. Disassemble the driveshaft assembly by first separating the needle bearing from the driveshaft.
25. Remove the collar and the locking ring from the groove in the driveshaft.
26. Remove the pinion stop and the drive from the driveshaft.
27. Remove the gear support from the driveshaft.
28. If not done in the previous steps, remove the screws that hold the solenoid assembly into the housing, and remove the nut from the field coil
connector.
29. Rotate the solenoid 90 degrees and remove it along with the return spring.