Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Wheel Bearing: Testing and Inspection
Tapered Roller Bearing
TAPERED ROLLER BEARING
Perform the following test to check for looseness in the bearing cartridge assembly:
1. Raise and suitably support the vehicle.
2. Remove the rear wheel.
3. Remove the brake drum detent screw and the brake drum.
4. Mount a dial indicator set with a magnetic base to a control arm or any other stationary part of the vehicle.
5. Push and pull the wheel hub by hand. If the wheel hub movement exceeds 0.05 mm (0.002 inch), replace the wheel bearing.
6. Install the rear brake drum.
7. Install the rear wheel.
8. Lower the vehicle.