Lanos SX Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Daytime Running Lamp Control Unit: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Pry open and remove the instrument panel side cover.
3. Reach underneath the instrument panel and remove the bolts and the daytime running lamp module.
4. Disconnect the electrical connector.
Installation Procedure
1. Install the daytime running lamp module with the bolts.
Tighten
Tighten the daytime running lamp module bolts to 2.5 Nm (22 lb.in).
2. Connect the electrical connector.
3. Install the instrument panel side cover.
4. Connect the negative battery cable.
