Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
1. Connect the inside door handle and the lock rods.
2. Insert the inside door handle into the slots in the door.
3. Slide the door handle rearward.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
4. Install the inside door handle screw.
Tighten
Tighten the inside door handle screw to 3 N.m (27 lb-in).
5. Install the door seal trim. Refer to "Door Seal Trim".
