Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
1. Insert the ABS 5.3 hydraulic unit into its mounting bracket and install the nuts.
-
Tighten the ABS 5.3 mounting nuts to 8 Nm (71 inch lbs.).
2. Install all of the hydraulic brake pipes.
-
Tighten the brake pipe nuts to 16 Nm (12 inch lbs.).
3. Connect the 31 -pin wiring harness connector J1.
4. Connect the negative battery cable.
5. Bleed the hydraulic system.