Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
3. Clean all the parts in clean denatured alcohol or brake fluid. Dry all the parts with unlubricated compressed air and lubricate the new seals, the
pistons, and the wheel cylinder bore with clean brake fluid before assembly.
4. Thinly coat all the parts except the dust caps with brake cylinder fluid.
5. Fasten the bleeder valve and the cap to the wheel cylinder.
6. Attach to the wheel cylinder the spring assembly, followed by the pistons, the seals, and the boots.
7. Inspect the pistons for free movement.
8. Install the wheel cylinder assembly.