Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
9. Twist the brake cables from the equalizer. Remove the equalizer.
10. Dislodge the rubber grommet from the underbody.
11. Lower the vehicle.
12. Remove the complete parking brake lever assembly and the cable from the assembly by unfastening the parking brake lever-to-vehicle underbody
bolts and removing the adjustment nut which was previously loosened on the pushrod.
Notice: The parking brake switch should be replaced if the BRAKE warning light in the instrument panel cluster does not glow when the parking
brake is applied with the ignition switch ON.
13. If necessary, remove the parking brake switch, which is attached to the parking brake lever assembly by a small screw.
14. Inspect the parking brake lever cable and the lever grip for damage, and replace if necessary.
Installation Procedure
Notice: If the parking brake lever is bent or damaged or if a new grip is required, replace the complete parking brake lever assembly, which includes
a new parking brake switch and lever cable.
