Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
1. Install the left heater hose to the coolant inlet line fitting. Slide the end of the heater hose over the coolant filling until the hose is seated.
2. Install the right heater hose to the filling below the intake manifold. Slide the end of the heater hose over the tilling until it is seated.
3. Install and seat the other end of each heater hose.
4. Compress and slide the spring clamps into position on the heater hoses and release the tension on the spring clamps.
5. Fill the cooling system.
6. Check the hoses for leaks.