Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
8. Connect the throttle cable to the intake manifold and the throttle body.
9. Connect all of the necessary vacuum lines that were previously disconnected.
10. Connect the heater inlet hose to the cylinder head.
11. Connect the surge tank coolant hose to the throttle body.
12. Install the alternator adjusting bracket at the intake manifold.
13. Install the alternator adjusting bracket bolt.
-
Tighten the alternator adjusting bracket bolts to 15 Nm (11 ft. lbs.).
14. Install the alternator adjusting bolt and the alternator driver belt.
15. Connect the CTS connector
-
Tighten the alternator adjusting belts to 15 Nm (11 ft. lbs.).
16. Connect the ECT sensor connector.
17. Connect the IAC valve connector.
18. Connect the TPS connector.
