Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
1. Connect the electrical connectors to the sockets on the back of the controller.
2. Attach the mechanical cable housings to their original control positions.
3. Press the cable end eyelet onto the post.
4. Gently insert the controller into position on the center console.
5. Install the lower left and right retaining screws.
Tighten
Tighten the control assembly retaining screws to 2 N.m (18 lb-in).
6. Install the audio system. Refer to Audio Systems.
7. Connect the negative battery cable.
8. Operate all of the positions of the controller to ensure proper function.
Control Assembly Knob Lighting
CONTROL ASSEMBLY KNOB LIGHTING
REMOVAL PROCEDURE
