Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
8. Install a new O-ring and mate the discharge hose to the condenser pipe connector block.
9. Install the discharge hose condenser pipe connector block retaining nut.
Tighten
Tighten the discharge hose-to-condenser pipe connector block retaining nut to 16 N.m (12 lb-ft).
10. Mate the A/C system hose connector block to the compressor. Hold it in place while tightening the retaining nut.
Tighten
Tighten the A/C system hose connector retaining nut to 33 N.m (24 lb-ft).
11. Connect the negative battery cable.
12. Evacuate and recharge the A/C system. Refer to "Discharging, Adding Oil, Evacuating, and Charging Procedures for A/C System".
