Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
Heater Hose: Service and Repair
Heating and Ventilation System
REMOVAL PROCEDURE
1. Partially drain the cooling system.
2. Compress and slide rearward the two heater hose spring clamps at the tire wall.
3. Gently twist the hose from the left to the right and back again to loosen the bond between the hose and the tube.
4. Remove the end of the hose from the tube.
5. Repeat Steps 3 and 4 with the other hose.
6. Compress the heater hose spring clamp on the inlet coolant line and slide the clamp rearward.
7. Remove the hose from the vehicle.
8. Compress the heater hose spring clamp at the connection below the intake manifold and slide the clamp rearward.
9. Remove hose from the vehicle.
INSTALLATION PROCEDURE
