Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
34. Install the upper and lower front timing belt cover.
35. Install the upper and lower front timing belt cover bolts.
-
Tighten the upper and lower front timing belt cover bolts to 10 Nm (89 inch lbs.).
36. Install the crankshaft pulley.
37. Install the crankshaft pulley bolt.
-
Tighten the crankshaft pulley bolt to 95 Nm (70 ft. lbs.) using a torque wrench. Using the angular torque gauge KM-470-B, tighten the
crankshaft pulley bolt 30 degrees plus 15 degrees.
38. Install the power steering pump pulley, if equipped.
39. Install the power steering pump pulley bolts, if equipped.
-
Tighten the power steering pump pulley bolts to 25 Nm (18 ft. lbs.).
40. Install the alternator drive belt.
41. Install the A/C compressor drive belt, if equipped.
42. Install the right front splash shield.
43. Install the right front wheel.
44. Install the air filter housing.