Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
13. Remove the stator.
14. Test the stator for an open circuit using the ohmmeter.
15. Pry off the baffle.
16. Remove the rectifier/regulator/brush holder assembly screws.
17. Remove the brush holder assembly and the regulator, cutting the terminal between the regulator and the rectifier bridge.
IMPORTANT: If the brush can be reused, reassemble the brush to the holder with the retaining pin, after cleaning the brush with a soft, clean
cloth.
18. Test the rectifier by connecting the ohmmeter terminals to the bridge and the heat sink.