Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
4. Connect the pressure line and return line hoses to the retaining clips at the bottom and the side of the radiator.
5. On SOHC engines, connect the pressure line pipe and the supply line hose to the inlet and outlet connections on the power steering pump.
6. On DOHC engines, install the air cleaner housing.
Tighten the air cleaner housing bolts to 12 Nm (106 inch lbs.).
7. On DOHC engines, connect the pressure line pipe and the supply line hose to the inlet and outlet connections on the power steering pump.
Tighten the power steering pump pressure line union nut to 28 Nm (21 ft. lbs.).
8. Install the battery and battery tray.
9. Fill the fluid reservoir with power steering fluid.
10. Inspect for leaks. If there are leaks, correct the cause of the leaks and bleed the system.
