Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
8. Turn the tightening bolt on the tension pulley to tighten the A/C compressor belt. Tighten the securing bolt on the tension pulley.
Tighten the tension pulley securing bolt to 25 Nm (18 ft. lbs.).
9. Install the right engine under cover.
10. Install the right wheel.
11. Lower the vehicle.
12. Install the power steering pump pulley and the pulley bolts.
Tighten the steering pump pulley bolts to 25 Nm (18 ft. lbs.).
13. Lower the engine using the engine support fixture J-28467-B.
14. Install the engine bracket-to-mount bolts.
Tighten the engine bracket-to-mount bolts to 60 Nm (44 ft. lbs.)
